Xuteng Iron Tower is one of professional leader China Hot Dip Galvanized GFL Round Steel Lightning Protection Tower manufacturers with high quality and reasonable price. Welcome to contact us.
The hot dip galvanized GFL round steel lightning protection tower has strong resistance to damage and is easy to install.
The lightning protection tower adopts angle steel, round steel, and steel pipes as the tower column materials, with a small wind load coefficient and strong wind resistance. The tower column is connected with an external flange, and the bolts are tensioned, which is not easy to damage. The tower column is arranged in a single pipe, four corner, or triangular shape, saving steel, occupying a small area, saving soil resources, convenient location selection, light weight of the tower body, convenient transportation and installation, short construction period, and the tower type is designed according to the wind load curve, with smooth lines, In rare wind disasters, it is not easy to collapse, and the design to reduce casualties conforms to the steel structure design specifications and tower and mast design regulations. The structure is reliable, and it is an important lightning protection facility for high-rise buildings, dangerous goods warehouses, oil storage tanks, power stations, electric fields, and computer rooms.
The hot dip galvanized GFL round steel lightning protection tower is made of round steel. Adopting round steel as the tower column material, with a small wind load coefficient and strong wind resistance, the lightning protection tower adopts welded connections to reduce maintenance of the original triangular layout of the tower column, saves steel, occupies a small area and saves land resources. The site selection is convenient, the lightning protection tower body is light, transportation and installation are convenient, and the support period is short. The lightning protection tower has smooth lines, and is prone to tipping in rare wind disasters, reducing human and animal casualties; The design complies with the State Steel Structure Design Specification and the Tower and Mast Design Regulations, and the lightning protection tower structure is reliable.
1. All components of the lightning protection tower are made of Q235 steel.
2. Lightning protection tower components should be factory processed and assembled on site, with priority given to bolt connections. Welding should be completed as much as possible in the factory. Lightning protection tower components should be treated with hot dip (zinc plating) anti-corrosion treatment. If on-site welding is necessary, the weld seam should be immediately treated with anti-corrosion treatment after welding.
3. Galvanized layer thickness: When the thickness of the plated piece is greater than 3mm and less than 6mm, the galvanized thickness should not be less than 70 microns (zinc adhesion not less than 460g/㎡). When the thickness of the plated piece is greater than or equal to 6mm, the galvanized thickness should not be less than 85 microns (zinc adhesion not less than 610g/㎡).
During the installation process of the tower, a theodolite is required to detect the verticality of the center of the tower. The inclination of the tower should not exceed H (main tower height)/1000, and the deviation of the centerline of the upper and lower water planes of each section of the tower body should not exceed H (node height)/750.